Pressure Vessels Steel
Pressure Vessels Steel
We specialize in steel grades for the production of pressure vessels.
Thanks to our wide range of products and in-depth knowledge, we specialize in steel grades for pressure vessels. To meet your orders, we supply optimized steel grades that go beyond standard norms.
Our steel grades for pressure vessels offer the following advantages:
-
Intermediate widths: 2250 and 2750 mm and extra-wide widths: 3250, 3500 and 4000 mm in grades P265GH, P295GH, P355GH, P275NH, P275NL2/NL1 and P355NL2/NH - Lengths up to 16,000 mm
- 16Mo3 thickness from 160 mm with Z15 testing performed by the manufacturer
- 13CrMo4-5, 10CrMo9-10 and X12CrMo5 with impact testing at -20 °C
- Stocking of 13CrMo4-5, 10CrMo9-10 and X12CrMo5 with the highest possible tempering temperatures.
Steel grades for pressure vessels (according to standard EN 10028-2/3)
| Types | Thicknesses (mm) | Widths (mm) | Lengths (mm) | Acceptance certificates in accordance with DIN EN 10204 |
|---|---|---|---|---|
| P265GH | 3 – 220 | 1.000 – 4.000 | to 16.000 | 3.1 |
| P295GH | 6 – 120 | 1.000 – 4.000 | to 16.000 | 3.2 TüV, 3.1 |
| P355GH | 4 – 350 | 1.500 – 4.000 | to 16.000 | 3.2 TüV, 3.1 |
| 16Mo3 | 1,5 – 250 | 1.500 – 3.500 | to 16.000 | 3.2 TüV, 3.1 |
| 13CrMo4-5 | 4 – 250 | 1.500 – 3.000 | to 12.000 | 3.2 TüV |
| 10CrMo9-10 | 4 – 100 | 1.500 – 3000 | to 12.000 | 3.2 TüV |
| X12CrMo5 | 6 – 100 | 2.000 – 3.000 | to 12.000 | 3.2 TüV |
| P275NH | 4 – 150 | 2.000 – 4.000 | to 16.000 | 3.1 |
| P275NL2/NL1 | 4 – 150 | 2.000 – 4.000 | to 16.000 | 3.1 |
| P355NL2/NH | 3 – 350 | 1.500 – 4.000 | to 16.000 | 3.2 TüV, 3.1 |
| P460NL2/NH | 5 – 400 | 2.000 – 3.000 | to 16.000 | 3.2 TüV |
Thick plates and hot-rolled sheets for the construction of pressure vessels and boilers
As a reliable partner in the production of pressure vessels, heat exchangers, transport containers and trays, we stock various grades of steel in our warehouses. Our customers, who buy thick plates and coiled sheets from us, operate in a wide range of industries or act as suppliers. These include industries such as petrochemicals, chemicals, pharmaceuticals, food production, waste management, energy and the environmental sector.
The requirements for the properties of steel grades for the construction of pressure vessels are high, as they must withstand extreme loads. Temperature resistance, both at high and low temperatures, depending on the intended use and location, and weldability play a decisive role. If corrosion resistance is required, Budownictwa Sp. z o.o. is your competent partner. We specialize in stocking steel grades resistant to acidic gases. Our steel grades come from renowned Western European manufacturers, recognized by key players in the energy, oil and gas sectors.
A wide selection of steel grades for pressure vessels
The steel grades we supply for the construction of pressure vessels and boilers meet international standards and regulations. We offer non-alloy, alloy, and heat-resistant steels for pressure vessels in accordance with DIN EN 10028-2, as well as normalized, weldable, fine-grained structural steels in accordance with DIN EN 10028-3. Our offer also includes the renowned Dillinal P460/630 and P440NJ4 steel grades from Dillinger Hüttenwerke. These steel grades are suitable for the construction of containers and tanks, such as tankers and tank containers, as well as for gas transport, including LNG. The sheets are characterized by increased strength and are part of our full range of products available at any time.
Another unique advantage in the competitive market are the P690QL2, P690QL1, and P690QH steel grades in accordance with EN 10028-6. These high-strength, quenched and tempered fine-grained structural steels, compliant with VdTÜV standard sheet 257, have proven themselves in tensile strength tests at 300 °C.
We love extreme and unusual solutions
We stock steel plates for the construction of pressure vessels and boilers in the widest possible range of dimensions to optimally meet the needs of our customers. Widths up to 4000 mm and lengths up to 16000 mm – these unusual sizes are nothing out of the ordinary for us. By stocking plates of intermediate thicknesses, we enable weight reduction in constructions. Additional tests, such as post-weld heat treatment (PWHT), hardness tests, tensile tests, and Charpy impact tests, are just some of the services we offer to meet a wide range of requirements.
Contact us. We will gladly help and advise you in developing specifications to best support the realization of your project.
